Peneplug is a rapid setting, integral crystalline cementitious waterstop designed to stop active water leaks and moisture ingress. RECOMMENDED FOR: Peneplug can be used internally or externally as a waterproof plugging mortar or where rapid setting and early strength gain is required. Plugging/stopping active water leaks. Sealing of leaking joints, form tie holes or cracks. Peneplug can be used on the following substrates: Concrete, Masonry, Earthenware or Stone. After mixing to a dry earth consistency using a few drops of water, form into a wedge and force into leak. Apply pressure by standing on and/or tapping hard with timber and hammer. Leak will seal immediately.
Mixing: Pour a handful and mix in small container. Gloves must be worn. Add enough water (drops) to mix to dry earth consistency.
Packaging: 2kg, 4kg, 10kg and 25kg plastic pails.