CEMPOXY-GROUT is a pourable, low viscosity, lightly filled, high strength epoxy grout. It has good mechanical properties and chemical resistance. CEMPOXY-GROUT is non-shrink and has excellent adhesion to concrete, steel, stone, timber and many other materials. Also available with a cold cure hardener for use from 0ºC to 10ºC.
VISCOSITY: Low, pourable, self leveling
MIX RATIO: 1:7 by volume (pre-packed)
POT LIFE: 45 minutes at 20ºC
MIN APPL TEMP: 10ºC. Standard Hardener
- Colour: Grey
- SG: 1.7
- Compressive Strength: 30 MPa @ 1 day
- Compressive Strength: 70 MPa @ 7 days
- Compressive Modulus: 7 GPa
- Tensile Strength: 24 MPa
- Thermal expansion: 6 x 10-5 mm/mm/ ºC
The data shown above reflects typical results based on laboratory testing under controlled conditions. Reasonable variations may occur on site.