CEMPOXY UA- MORTAR/PUTTY

DESCRIPTION:

CEMPOXY UA -MORTAR/PUTTY is a high performance two part, low-slump, non-shrink epoxy mortar/putty formulated to allow hand mixing. It bonds strongly to dry or damp concrete, steel, stone, glass, aluminium etc. It sets quickly, can tolerate water & has excellent chemical resistance.

TYPICAL APPLICATIONS:

Most epoxy mortar/putty applications
Repairs to concrete structures
Slab repairs
Precast concrete & concrete pipe repairs
Control joint shoulder repairs
Kerb repairs
Horizontal or overhead mortaring of starters, bolts, anchors & dowels
Underwater applications (UA)

ADVANTAGES:

Versatile
High compressive strength
High tensile strength
High bond strength
Non shrink
Durable
Good chemical resistance

TECHNICAL DATA:

VISCOSITY: Non-slump, mortar putty
MIX RATIO: 1:1 by weight or volume
POT LIFE: 30min at 20ºC
MIN APPL TEMP: 5ºC
CURED PROPERTIES:
- Colour: Grey
- SG: 2.0
- Compressive Strength: 45 MPa @ 1 day
- Compressive Strength: 70 MPa @ 7 days
- Compressive Modulus: 13 GPa
- Tensile Strength: 23 MPa
- Thermal expansion: 5 x 10-5 mm/mm/ ºC
The data shown above reflects typical results based on laboratory testing under controlled conditions. Reasonable variations may occur on site.