Tile Bond Latex

Tile Bond Latex should be used undiluted. It can be used both as a Primer and an additive/modifier for Tile Bond.
As a primer brush it straight from the container on the substrate.
As an additive/modifier - use 1Lt of Tile Bond Latex per 5 Kg of Powder Tile Bond - as complete water replacement.
Tile Bond Latex is a modified copolymer latex for suitable for mixing with Cemix Tile Bond to give Improved Adhesion and Flexibility when Laying all types of Tiles and Slate on Difficult Surfaces.
Cemix Tile Bond Latex can be used for ceramic tiles of every type including fully vitrified, monocottura and quarry tiles, natural stone, marble, slate and large tiles on more difficult substrates such as wood, particle board, fibre cement sheet, gib board etc. Also for use over underfloor heating, exterior applications, over old tile flooring, vinyl asbestos flooring, asphalt tiles and linoleum Tile Bond Latex when mixed with Tile Bond can be used for grouting larger tiles, natural stone, slate and in continuously immersed areas or areas with high point loads etc. Tile Bond Latex and Tile Bond are water resistant when cured and are not affected by water.