COVERAGE:

Type of formwork coverage per litre of product:

• Steel: 30m2 to 60m2

• Smooth Plywood: 20m2 to 40m2

• Rough Sawn Timber: 15m2 to 25m2

PREPARATION:

The substrate should be free of dust, grease, wax, oil, dirt, loose plaster, laitance, curing compounds, paint and all other friable materials and contaminants likely to prevent the adhesive bonding.

The substrate must be dry.

MIXING:

Ready to use. No mixing required.

APPLICATION:

1. Shake / stir before use.

2. Apply a thin coat of product by brush or spayer onto the  casting face, back and sides, before each pour or cast of concrete.

Pouring can take place immediately after product application or within 24 hours.

CLEANING:

Clean tools with water immediately after use.

STORAGE & SHELF LIFE:

Up to 12 months when stored in the original, unopened packaging, in a dry place at 23°C and 50% relative humidity.