Cemix Products Ltd logo

admixtures

C.F.R.A

USER CATEGORY :

DIY TRADES COMMERCIAL

Packaging

  • 4L
  • 20L

PRODUCT INFORMATION & RESOURCES

DESCRIPTION:
CEMIX C.F.R.A. is a formwork release agent, designed to break the bond between cast concrete and its formwork, allowing for an easy release.

TYPICAL USES:
CEMIX C.F.R.A. may be used on most formwork for concrete casting.

ADVANTAGES:
– Can be safely used on placing tools

– Produces a stain-free concrete finish

COVERAGE:
Covers up to 18m2 per litre of product when used with suitable equipment.

PREPARATION:
The substrate should be free of dust, grease, wax, oil, dirt, loose plaster, laitance, curing compounds, paint and all other friable materials and contaminants likely to prevent the adhesive bonding.

The substrate must be dry.

MIXING:
Ready to use. No mixing required.

APPLICATION:
1. Shake/stir before use.
2. Apply a thin coat of product by brush or spayer onto the casting face, back and sides, before each pour or cast of concrete.

Pouring can take place immediately after product application or within 24 hours.

CLEANING:
Clean tools with water immediately after use.

STORAGE & SHELF LIFE:
Up to 12 months when stored in the original, unopened packaging, in a dry place at 23°C and 50% relative humidity.

LIMITATIONS:
Avoid application of thick coating to new hardboard or plywood formwork, as this may damage the surface finish. Avoid contact with reinforcements, as the product prevents concrete from binding to steel.

The product creates a dust film when it comes into contact with concrete. Brush film away before any subsequent work is carried out.

If your project requires Building Consent, please email info@cemix.co.nz about the suitability of this product before use.

Related Videos