DESCRIPTION:
CEMIX CEMPLUS is a highly concentrated, non-staining, liquid plasticiser, designed to improve the workability and adhesion of exterior use plaster and mortar.
TYPICAL USES:
CEMIX CEMPLUS can be used as an air entraining additive for exterior use plaster and mortar, removing the need for adding lime to the mix.
ADVANTAGES:
– Improves workability and bond strength
– Allows for quicker application
– Reduced cracking from shrinkage
– Minimises water absorption
– Minimises efflorescence
– Freeze resistant
DOSAGE:
2ml to 3ml per kg of cement
PREPARATION:
Refer to the manufacturer’s recommendations for the exterior use plaster or mortar being used.
MIXING:
1. Shake before use.
2. Add the product to the volume of water recommended for the
mix.
Use 2ml to 3ml of product per kg of cement.
Note: Do not aerate the mixture by stirring over vigorously or for too long. Accurate measuring is essential as too much product can weaken the mix – use less product rather than more.
APPLICATION:
Refer to the manufacturer’s recommendations for the exterior use plaster or mortar being used.
CLEANING:
Clean tools with water immediately after use.
STORAGE & SHELF LIFE:
Up to 12 months when stored in the original, unopened packaging, in a dry place at 23°C and 50% relative humidity.
LIMITATIONS:
Accurate measuring is essential as too much product can weaken the mix – use less product rather than more.
If your project requires Building Consent, please email info@cemix.co.nz about the suitability of this product before use.
TECHNICAL DATA:
– Appearance: White
– Application Temperature: 5°C – 30°C
The data shown above reflects typical results based on laboratory testing under controlled conditions. Reasonable variations may occur on site.
