top of page
repair and grouts banner.png
Purple Block.png

DOWNLOADS

SS Fastcrete banner.png
CLEANING
ROOF & GUTTER REPAIR TAPE .jpg

CEMIX CONCRETE CLEANER MOSS & MOULD is the ideal solution for cleaning moss, mould, mildew and algae from concrete and masonry surfaces.

TYPICAL USES:

CEMIX CONCRETE CLEANER MOSS & MOULD can be used on a variety of concrete and masonry surfaces, including driveways, pathways, patios and walls.


ADVANTAGES:

• Easy to use

• Can be neutralised with water

COVERAGE:

Varies according to the substrate condition and climate. Approximately 4m2 per litre of product.


PREPARATION:

Ensure that the substrate is dry before use. Always carry out a small test area first.


MIXING:

In a spray bottle or watering can, add 1 part CEMIX CONCRETE CLEANER MOSS & MOULD to 1 part

clean water.


APPLICATION:

1. Apply the diluted product to the dry surface.

2. Wait for a minimum of 30 seconds before rinsing the surface with clean water.

Significant infestations may require brushing with a firm bristle or wire brush or broom before rinsing off the surface with clean water. A second application may also be required.


CLEANING:

Clean tools with water immediately after use.

Supplier Item#

5L - 26036

Download the Data Sheet for full information:

bottom of page