CEMIX CONCRETE SEALER WATER BASED (WB) is a multi-surface stain resistant water based penetrating clear water repellent sealer. It has outstanding adhesion, penetrating and sealing properties on various substrates. It can be successfully applied on to slightly damp but surface dry pavers. The application does not produce any discolouration of the surface and is suitable for waterproofing and sealing a wide variety of absorbent concrete surfaces and not suitable for very dense natural stone, especially marble and granite. Comes in 2 variants: Matt & Gloss.
TYPICAL APPLICATIONS & USES
Protecting penetrating layer for concrete substrates
Ideally this sealer should be applied on new freshly laid cured concrete. The surfaces should be water blasted and made clean, free from grease, loose particles, dirt, paint, curing compounds etc. Moss or algae growth should be removed with a suitable treatment and washed with clean water.
CEMIX CONCRETE SEALER (WB) Shake or stir thoroughly before use. CEMIX CONCRETE SEALER (WB) should be applied without diluting in two coats to ensure complete coverage and saturation of the paver substrate. Application with conventional spray equipment or roller is the preferred method. Depending on the porousity of the substrate – coverage of 5m2/l should be achieved. On high absorbent surfaces, repeat or increase the rate of application until surface is completely saturated. Re-application at a later date is possible provided the substrate is clean.
Note: There is not a sealer suitable for all types of pavers, tiles, or other surfaces. Never apply more product than is being absorbed into the surface you are sealing. If product is pooling on the surface, brush the excess off. If you feel no product or very little product is being absorbed, stop and seek technical assistance. Always do a test area first to approve the look and feel before doing the entire area. Ensure there is no rising damp as this will make the sealer surface cloudy. Over application can make the surface slippery especially when wet. Thoroughly agitate contents before use.
Spray or roller equipment should be washed out immediately after use with water.
STORAGE / SHELF LIFE
Twelve (12) months when stored in unopened, original containers. Storage area should be not exposed to extreme temperatures. Do not expose to direct sunlight in storage.