COVERAGE:

Varies according to the substrate condition and climate. Approximately 10m2 per litre of product, per coat.

PREPARATION:

The substrate should be free of dust, grease, wax, oil, dirt, loose plaster, laitance, curing compounds, paint and all other friable materials and contaminants likely to prevent the adhesive bonding. New concrete should be left with a wood float finish and sufficiently aged as per manufacturer's recommendations. All substrates should be structurally sound, securely fastened and properly supported to eliminate any movement that may cause cracking.

Ideally, CEMIX DRIVEWAY SELAER should be applied to new concrete or masonry. If applying to existing work, it is recommended to remove any stains, marks, variations etc. from the substrate before application, as the product is likely to magnifiy these. Ensure that the substrate is dry before application. Always carry out a small test area to approve look and feel.

APPLICATION:

1. Stir before use.

2. Apply the product generously with a brush or roller.

3. Repeat for a second coat.