top of page
repair and grouts banner.png
Purple Block.png

DOWNLOADS

SS Fastcrete banner.png
WATER BASED
ROOF & GUTTER REPAIR TAPE .jpg

CEMIX PAVING SEALER is a water based, penetrating and film forming (hyrbid), clear sealer, designed to resist water and stains from paving. When used as a film forming sealer, it produces a matte finish.

TYPICAL USES: CEMIX PAVING SEALER is ideal for use on pavers. Suitable for use in interior and exterior applications.


ADVANTAGES:

• Ready to use

• Resists water, stains and dirt.

• Minimises efflorescence

• Inhibits mould growth

• UV resistant

• Hybrid sealer: penetrating and film forming

COVERAGE:

Varies according to the substrate condition and climate. Approximately 5m2 to 14m2 per litre of product, per coat.


PREPARATION:

The substrate should be free of dust, grease, wax, oil, dirt, loose plaster, laitance, curing compounds, paint and all other friable materials and contaminants likely to prevent sealing and coating.

All substrates should be structurally sound, securely fastened and properly supported to eliminate any movement that may cause cracking.


Ideally, CEMIX PAVING SEALER should be applied to new, freshly laid pavers. If applying to existing work, it is recommended to remove any stains, marks, variations etc. from the substrate before application, as the product is likely to magnifying these.


APPLICATION:

1. Stir before use.

2. Apply the product generously with a brush, roller or sprayer.

3. Repeat for a second coat.

Supplier Item#

1L - 20925, 4L - 20925

Download the Data Sheet for full information:

bottom of page