COVERAGE:

Varies according to the substrate condition and climate. Approximately 5m2 to 14m2 per litre of product, per coat.

PREPARATION:

The substrate should be free of dust, grease, wax, oil, dirt, loose plaster, laitance, curing compounds, paint and all other friable materials and contaminants likely to prevent sealing and coating. Ideally, CEMIX POTTERY SEALER should be applied to new pottery. If applying to existing work, it is recommended to remove any stains, marks, variations etc. from the substrate before application, as the product is likely to magnifiy these. Ensure that the substrate is dry before application. Always carry out a small test area to approve look and feel.

APPLICATION:

1. Shake before use.

2. Apply the product straight from the spray bottle. The sealer will dry in approximately 20 minutes at 25°C. Further coats may be required for more porous substrates. IIf a more satin finish is preferable, build up coats (as required)