top of page
repair and grouts banner.png
Purple Block.png

DOWNLOADS

SS Fastcrete banner.png
NON-STRUCTURAL REPAIRS
ROOF & GUTTER REPAIR TAPE .jpg

CEMIX QUICK PLUG is a fast setting, hydraulic repair mortar, designed to immediately stop leakage and seepage from
cementatious substrates

TYPICAL USES:

CEMIX QUICK PLUG can be used on concrete and masonry substrates. Suitable for use in wet, if not very damp applications only i.e. where there is existing leakage or seepage, both above and below ground, water tanks, retaining and basements , around pipes and sleeves.


ADVANTAGES:

• Fast setting

• Instant bond

PREPARATION:

The substrate should be free of dust, grease, wax, oil, dirt, loose plaster, laitance, curing compounds, paint and all other friable materials and contaminants likely to prevent the adhesive bonding. All substrates should be structurally sound, securely fastened and properly supported to eliminate any movement that may cause cracking.


MIXING:

1. Wear rubber or polythene gloves.

2. Mix CEMIX QUICK PLUG by hand for 15 seconds in a ratio of 4:1 (product to water).


APPLICATION:

1. Work the product into a suitable shape for application for 15 seconds.

2. In one hand, hold the product until it begins to stiffen or generate heat.

3. Push the product into the crack, hole or similar.


DRYING & CURING:

Up to 120 seconds

Supplier Item#

1 KG - 25340

Download the Data Sheet for full information:

bottom of page