top of page
repair and grouts banner.png
Purple Block.png

DOWNLOADS

SS Fastcrete banner.png
NON-STRUCTURAL REPAIRS
ROOF & GUTTER REPAIR TAPE .jpg

CEMIX REPAIR & GROUT is a general purpose, high strength, high flow, non-shrink cementitious grout. It contains admixtures that provide positive expansion when the grout is in its plastic state, and shrinkage compensation when it is in its hardened state.

TYPICAL USES:

General purpose and precision grouting applications including:

• Small repairs to old and new concrete

• Anchor bolts and rods

• Void, recess and cavity filling


ADVANTAGES:

• Versatile - pourable and trowelable

• Resistant to water borne salts

• Abrasion resistant

YIELD:

Approximately 0.54L or 0.00054m3 per kg of product with 180ml of water.


STANDARDS:

Complies with NZS 4210:2000


MIXING:

1. Add clean water to a mixing container.

Per kg contents to water ratio:

• Drypack: 90ml to 110ml

• Plastic Trowellable: 160ml

• Flowable Grout: 190ml to 200ml

2. Add CEMIX REPAIR & GROUT slowly to the water, mixing consatantly with a mixing paddle, until a smooth consistency is achieved.


APPLICATION:

1. Allow mix to stand for 60 seconds prior to immediate application.

2. Application is from one side only, completely filling the void,

and avoiding air entrapment.

3. Rod grout to move and compact as required.

4. Trowel finish as required.


DRYING & CURING:

To attain maximum compressive strength, minimise water loss during the curing process (at least 7 days).

Supplier Item#

5 KG - 20857, 62G G - 20858, 1.25 KG - 20859

Download the Data Sheet for full information:

Anchor 1
bottom of page