CEMIX TURF ADHESIVE is a high strength all weather adhesive suitable for indoor and outdoor use. With excellent water and heat resistance it will bond securely to a wide variety of substrates and is ideal for installations around swimming pools, balconies and outdoors which may be subject to moisture after installation.
Surfaces must be dry, smooth, clean and free of any contaminants that may limit adhesion to the subfloor, in indoor situations. Imperfections in the subfloor can be fixed using either a Cemix floor leveller or cemix floor repairer. The adhesive should not be used in extremely hot or cold conditions (i.e. below 10°C or above 35°C).
Apply adhesive to the surface being covered with a 3.2×1.6×3.2mm “V” notched trowel.
Spread only sufficient adhesive so that the adhesive can be covered with artificial grass before the adhesive dries.
When laying the artificial grass outdoors, make sure the weather conditions are conducive to laying, as the adhesive takes 4 hours to cure before water resistant and 48 hours before waterproof. It is advisable to use plastic sheeting to cover work areas if weather becomes unsettled.
Each litre of CEMIX TURF ADHESIVE will cover approximately 3m². Coverage will vary depending on the condition of the subfloor and application technique.
Clean tools and equipment immediately after use, with mineral turps.
24 months when stored in the original unopened packaging, in a dry place at 23°C and 50% relative humidity.